How To Put A Stomp Pad On Your Snowboard

If you lot have troubles riding your snowboard with your back foot out of the bounden when you get off the elevator, and then you should get a stomp pad. What is a stomp pad, why do we utilize it, where do we put it and how do nosotros attach it to the snowboard.

What is a snowboard stomp pad?

Simple Snowboard Stomp Pad Snowboard stomp Pad is a rubbery or foamy (or any material that has high friction) pad that is attached to the acme of the snowboard and then you tin can stand on it, when your back human foot is not strapped into the snowboard binding.

Snowboard surface is slippery, peculiarly when it is wet from snowfall. So when your back foot is unbuckled like, when you go along a ski lift, get off the ski lift or just traverse a flat department of the slope, you put our back pes on the stomp pad. Considering the stomp pad is generally made of rubber (and has anti skid profile) and so are the soles of our snowboard boots, they stick together much better than snowboard boots and snowboard surface. With stomp pad we tin even brand some easy turns, employ the edge of the snowboard, stop when nosotros need to without wiping out etc…

Who should use information technology?

It's very useful for beginners and not then experienced riders. It helps you control the board when your back anxiety is out of the binding. If yous are experienced and accept total control over your lath you lot tin can do all that without the pad. Only stomp pad does go far easier. On the other hand – some people say that stomp pad is a sign of a beginner and merely sissies use them :). Just and then y'all know.

How to attach it to your snowboard?

Stomp pad comes with a layer of strong mucilage on the bottom side. First thing you need to practice is mark the spot where yous volition put information technology. Information technology comes right in front of your back bounden, that means in betwixt the bindings. Put your snowboard boot just in front of the back bounden and make a spot under the center of the kicking. This volition help you avert gluing information technology to close to the binding, where y'all can't step on it with your whole boot. Next thing you need to do is make clean the elevation of your snowboard. Remove all the dust, oil, blood, sperm, marijuana and other stuff from the deck. Wipe it clean and let information technology dry. Too, don't wipe off the Ten mark that you fabricated :).

Make sure you are inside, if information technology is too common cold, the glue gets harder and the pad might come off.

And finally, remove the paper/plastic/any from the bottom of the pad and identify information technology firmly on to the snowboard. Keep the pressure level for a while and you are set to go. If you lot have enough time, it is improve to exit the pad under pressure (put some heavy books on it) for 24 hours before using it.

If the pad falls off?

Usually you tin stick it dorsum on since the mucilage will nevertheless be sticky. Merely it will first coming off sooner and sooner, so at i time yous volition have to throw it away and get a new one. Remove all the old gum from the snowboard, then follow the didactics above.

Stomp pad styles

Just go crazy. Similar everything in life, snowboard stomp pads have gone from simple boring black pieces of rubber to designed, bling bling, colorful, high tech…well pieces of condom.

Savor your ride with the back pes unbuckled.

How to go the stomp pad off your snowboard?

Use a straight edge like a pocketknife, razor, straight head screwdriver and use it on the edge of the pad. Be careful not to stab the lath or yourself for that matter.
When y'all take peeled off like an inch of the pad use a blow drier to heat the pad and the glue.
The rest should then peel off easier without the use of knife.
Clean the mucilage from your board. You lot tin utilise nail shine remover for instance (only make surf to test it first, you don't desire to remove the graphics equally well).